26th National Symposium on Cryogenics and Superconductivity

22-24 February 2017

VECC

Home > Author Index

Authors
a \| b \| c \| d \| e \| f \| g \| h \| i \| j \| k \| l \| m \| n \| o \| p \| q \| r \| s \| t \| u \| v \| w \| x \| y \| z \| [all]

K, AZHAR	83-Preliminary design and analysis of tripropellant rocket engine

K E, REBY ROY	115-Experimental investigations on chill down along packed spherical bed regenerator 116-Numerical investigations on the pressure drop characteristics along a compact regenerator

K N, Jayachandran	87-Numerical studies on turbine drive gas recovery at the LOX booster turbopump exit of a staged combustion cycle based rocket engine

K S, Bijukumar	79-Study of Dual Bell Nozzle

K. V., Srinivasan	30-Cryogenic setup for calibration of temperature sensors

KALKUNTE, Narasimha Murthy	77-Abrasion behaviour of cryogenic treated permanent moulded austempered ductile iron

KANJILAL, D	112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters

KANZARIA, Hiren	57-Design of Nitrogen Cryolines for ITER

KANZARIA, Hiren	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

KAPOOR, H.	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

KAPOOR, Himanshu	57-Design of Nitrogen Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER

KAPOOR, Himanshu	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER 1-Optimized filling of a 5000 liter liquid helium dewar

KAR, R	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

KAR, Ranjan	106-Development of Oil Removal Module for helium liquefier @50lph without LN2 precooling

KAR, Soumen	56-AC CHARATERIZATION OF MODULAR HIGH TEMPERATURE SUPERCONDUCTING FAULT CURRENT LIMITER 59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT 60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET 61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi 68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE 89-CRYOGENIC HEAT ANAYLSIS OF LINAC CRYOMODULES 112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters 186-Invited Talk IT: "DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE"

KARRI, Veerandra Yadav	33-Application of thermoacoustic devices in cryogenic systems: A review since the year 2000

KARRI, Veerandra Yadav	31-Design analysis and development of a thermoacoustic engine 74-DESIGN AND DEVELOPMENT OF A HIGH SPEED ROTARY VALVE FOR OPERATION IN A PRESSURE WAVE REFRIGERATOR

KARSHAN PRAJAPATI, Karshan	104-A prototype experiment on Cryocooler based Cryopump

KARTIK PATEL, Kartik	104-A prototype experiment on Cryocooler based Cryopump

KARUNANITHI, R.	38-Design of 10 KA DC terminal connector for HTS cable 39-Design of magnetic shielding for 600 MWh SMES

KASTHURIRENGAN, Srinivasan	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K 45-DESIGN AND DEVELOPMENT OF LOW CAPACITY TWIN BED SILICA GEL–WATER ADSORPTION REFRIGERATION SYSTEM 48-DESIGN, DEVELOPMENT AND STUDIES ON A LIQUID NITROGEN BASED CRYOSOPTION PUMP 49-DEVELOPMENT OF AN EXPERIMENTAL SETUP FOR EFFECTIVE THERMAL CONDUCTIVITY STUDIES OF INSULATIONS BETWEEN 77K AND 300K

KATHOLIL, Gireesan	20-Measurement of Magnetocardiogram in unshielded environment 99-Testing different pick up coil configurations for SQUID sensor based Magnetocardiography(MCG) and Magnetoencephalography (MEG) studies

KAUR, JASMEET	69-Low temperature magnetic properties of Cu-Zn ferrite thin films

KAUSHAL PANDYA, Kaushal	104-A prototype experiment on Cryocooler based Cryopump

KEYUR, Desai	21-Theatrical and experimental evaluation of the thermal conductivity of perlite for cryogenic insulation (300K to 77K)

KHAN, Fayas	20-Measurement of Magnetocardiogram in unshielded environment 99-Testing different pick up coil configurations for SQUID sensor based Magnetocardiography(MCG) and Magnetoencephalography (MEG) studies

KHARE, Prashant	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES 19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

KHARE, Vipendra	100-Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet and qualification at liquid nitrogen temperature

KISHI, David	178-Online quality factor measurement of the SRF cavity in Injector Cryo-Module of VECC Electron Linac

KISHOR KUMAR, V V	66-MODELLING OF OSCILLATORY FLOW THROUGH REGENERATOR OF A STIRLING CRYOCOOLER USING A CORRELATION BASED METHOD

KOVESHNIKOV, Alexy	187-OVERVIEW OF THE CRYOGENIC SYSTEM FOR VECC E-LINAC

KRISHNACHANDRAN, C.	44-DESIGN AND DEVELOPMENT OF AN EMISSIVITY MEASUREMENT SETUP FOR USE AT 100K

KULKARNI, Swati	12-Thermal Analysis and Investigations on Design Aspects of Aluminum alloy based Liquid Helium Dewar

KULKARNI, Swati	13-Design and Development of Helium Gas Purifier

KUMAR, Aashish	112-A 4.2K to 400K control temperature cycling system and integration with automatic measurement algorithms of temperature vs electrical transport parameters

KUMAR, KAMLESH	82-Design the cold box of the helium liquefier / refrigerator

KUMAR, Manoj	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE 89-CRYOGENIC HEAT ANAYLSIS OF LINAC CRYOMODULES

KUMAR, Manoj	23-Design improvements in liquid helium transfer line for vertical test stand

KUMAR, Mukesh	68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

KUMAR, Mukesh	59-STRESS ANALYSIS OF CRYOGENIC SUPPORT STRUCRTURE OF SUPERCONDUCTING MRI MAGNET CRYOSTAT 60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET 61-ANALYSIS OF 3D-STRESS IN A 1.5 T SUPERCONDUCTING MRI MAGNET 62-Development of Superconducting Joint Characterization Test Facility at IUAC, New Delhi

KUMAR, Rajesh	56-AC CHARATERIZATION OF MODULAR HIGH TEMPERATURE SUPERCONDUCTING FAULT CURRENT LIMITER 68-DEVELOPMENT OF SUPERCONDUCTING MAGNET FOR 1.5T MRI SCANNER: A MAKE IN INDIA INITIATIVE

KUMAR, RAJESH	60-QUENCH ANALYSIS OF 1.5 T SUPERCONDUCTING MRI MAGNET

KUMAR, Uday	57-Design of Nitrogen Cryolines for ITER 107-Dynamic study of flow in quench lines for ITER 1-Optimized filling of a 5000 liter liquid helium dewar

KUMAR, UDAY	11-THERMO-HYDRAULIC ANALYSIS AND MECHANICAL DESIGN OF PURGE LINES CONNECTED WITH HELIUM COLD BOXES OF ITER CRYOGENIC SYSTEM

KUMAR, Uday	98-Approach of Fatigue Analysis of 6-100K Cryolines for ITER

KUMAR YADAV, Vipin	31-Design analysis and development of a thermoacoustic engine

KUNDU, B	179-Experience of helium cryogenic system towards six years uninterrupted operation of Superconducting magnet of K-500 cyclotron at VECC

KUNVAR S., Kunvar	104-A prototype experiment on Cryocooler based Cryopump

KUSH, P.K.	47-Safety system assessment of cold box for large capacity helium liquefaction system 73-Design and development of 2 Kelvin J-T heat exchanger

KUSH, Pradeep	18-DESIGN OF 70 K THERMAL SHIELD OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITIES 19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

KUSH, Pradeep Kumar	23-Design improvements in liquid helium transfer line for vertical test stand

KUSHWAHA, Manoj	19-DEVELOPMENT OF A CRYOMODULE FOR BETA 0.61 650 MHZ SCRF CAVITY AT RRCAT

KUZHIVELI, Biju	108-Design of a Portable Dual Purpose Pulse Tube Cooler

KUZHIVELI, Biju T	125-Design and analysis of a portable Free piston Stirling deep freezer

KUZHIVELI, Biju T	42-Effect of bottom heating on thermal stratification and self-pressurization in a cryogenic tank 43-NUMERICAL ANALYSIS OF MINIATURE COAXIAL STIRLING TYPE PULSE TUBE CRYOCOOLER WITH A MODIFIED RESERVOIR 51-Analysis and simulation of stratification in cryogenic storage tanks 83-Preliminary design and analysis of tripropellant rocket engine

KUZHIVELI, Biju T.	52-NUMERICAL INVESTIGATION OF INFLUENCE OF BLOWING RATIO ON FILM COOLING OVER A FLAT PLATE WITH BENT INJECTION HOLE